Teledyne LeCroy STX M6-1 SAS_SATA Protocol Analyzer User Manual - Manual (Page 21)

Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual 19
LEDs LeCroy Corporation
Figure 1.2: Front Panel
LEDs
Each link is supported by LEDs with the following functionality:
GreenThis LED is illuminated during the OOB sequence before the link is established and
after link is established it indicates traffic on the bus.
Orange This LED is illuminated as follows:
Speed Initiator Target
1.5G Off Off
3.0G On Off
6.0G On On
Yellow This LED is illuminated when a link is established.
Red This LED illuminates when an error occurs.
Blue This LED is illuminated when a trigger occurs.
Figure 1.3: LEDs
Status and Configuration Display
The Analyzer front LCD display indicates the configuration and status of operations. For
example, during initialization, the LCD panel displays boot status messages.