Teledyne LeCroy STX M6-1 SAS_SATA Protocol Analyzer User Manual - Manual (Page 153)

Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual 151
Exercise and Capture LeCroy Corporation
Figure 2.152: Default Data Block Dialog Box
To add another data block:
1. Click the New button in the Data Block dialog box.
Figure 2.153: New Data Block Dialog Box
2. Choose the number of data columns (up to 16 data cells/row) and the cell length (up
to 16 bytes/cell). This is a display function only.
3. Click either the Bin, Hex, or Ascii option button to choose a number format.
4. Click either the LSB or MSB option button to choose a bit order.