Teledyne LeCroy STX M6-1 SAS_SATA Protocol Analyzer User Manual - Manual (Page 159)

Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual 157
Performance Analysis LeCroy Corporation
Figure 2.160: SAS: Performance Analysis Definition Dialog
Note: When you use the Exerciser, channel 2 is not usable and is greyed out.
Figure 2.161: SATA: Performance Analysis Definition
Choose Protocol (SAS only)
Check the protocol check box(es) to select the protocol category:
 SSP for SCSI Commands
 STP for SATA Commands
 SMP for Management Commands
 Address Frame for Open and Identify
Analyzer Port
Check the Analyzer Port(s) to include in the performance calculation.
Link
Check the Link(s) to include in the performance calculation.
STP Port
Enter the STP port number for the STP port to include in the performance calculation.
SAS Source Address (SAS only)
Enter a SAS Source Address to include in the performance calculation.
SAS Destination Address (SAS only)
Enter a SAS Destination Address to include in the performance calculation.