Teledyne LeCroy STX M6-1 SAS_SATA Protocol Analyzer User Manual - Manual (Page 51)

Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual 49
Easy Mode (Pre‐Defined Setups) LeCroy Corporation
 Exclude parameters from capture.
 Trigger on a pattern or sequence of patterns (see "Trigger Setup" on page 70 ).
 Configure trace capture memory (Settings tab).
 Select file to save trace capture in memory (Settings tab).
 Include a project note (Notes tab).
Saving a Trace Capture
You can save a Trace Capture for review at a later time using the Save As dialog.
Figure 2.6: Save As Dialog
You can limit the range of the saved file. You can save:
 All Samples
 range between selected cursors
 range between selected Idle, link, commands
 range between bookmarks
Save Filtered Sample checkbox saves a trace file without filtered data. You can Apply
Show/Hide Link Setting.