Teledyne LeCroy STX M6-1 SAS_SATA Protocol Analyzer User Manual - Manual (Page 54)

LeCroy Corporation Easy Mode (Pre‐Defined Setups)
52 Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual
Export to Generator
From the File menu, you can Export to Generator, using the Export to Generator dialog.
Figure 2.9: Export to Generator Dialog
In the Export to Generator dialog you can
 Limit the range of the saved file. You can save:
 All Samples
 Range between selected cursors
 Range between ATA Commands or Transport
 Import SSP Frames, SMP Frames, or STP Frames.
 Insert Waits.
 Use Auto Alignment.
 Select the Port.
 Indicate Project Name.
Note: The resulting Trainer Generation file cannot exceed 2 MB or 1,000,000 packets.
Export Read/Write Command Report
From the File menu, you can Export Read/Write Command Report as an Excel file, using
the Save As dialog.