Vanguard CT-8000 User Manual
Page 102
Advertising
CT-8000 USER’S MANUAL
REV 2
97
e. The following screen will be displayed:
Finish closing the breaker manually and then press the “ENTER” key. The test results will
be printed and you will be returned to the “START-UP” menu. A typical test results
printout is shown in Figure 40.
Figure 40. Typical Slow-Close Test Results Printout
NOTE
The breaker’s stroke is the sum of the contact touch and contact wipe distances.
LIFT BRKR TO CLS POS
THEN PRESS “ENTER”
TO FIND CONTACT WIPE
Advertising