Vanguard CT-8000 User Manual
Page 48
Advertising
CT-8000 USER’S MANUAL
REV 2
43
j. The following screen will be displayed:
Enter a setup number from 1 to 9 using the numeric keypad.
k. The following screen will be displayed:
Press the
[ENTER]
key to save the setup.
NOTE
If a setup already exists at the selected memory location, it will be over-ridden
by the new setup values.
l. The following screen will be displayed while the setup is being saved:
The following screen will be displayed when the setup has been saved:
Press any key to return to the “START-UP” menu.
SETUP SAVED!
SAVE IN PROGRESS
PLEASE WAIT...
“ENTER” TO SAVE
SETUP NUMBER 1
ENTER SETUP NUMBER
TO SAVE (1-9):
Advertising