Vanguard CT-8000 - Manual (Page 17)

REV 2 CT-8000 USER’S MANUAL
12
3.1.2. Initiate Cable Connections
The CT-8000 can trip or close breakers through a solid-state device operating on any AC or DC
control voltage ranging from 10 to 300 Volts. Both the trip and close circuits are protected by 5
Ampere fuses. A typical DC trip and DC close control circuit connection is shown in Figure 5. A
typical DC trip and AC close control circuit connection is shown in Figure 6.
Figure 5. Typical DC Trip and DC Close Control Circuit Connection