Vanguard CT-8000 User Manual
Page 81
REV 2 CT-8000 USER’S MANUAL
76
i. The following screen will be displayed:
Press the
[4]
key (PLOT 0 – 200MS).
j. The following screen will be displayed:
The Dynamic Resistance graph can be printed with a 0 to 400 micro-ohm linear scale, a 0
to 2000 micro-ohm linear scale, or a 0 to 2000 micro-ohm semi-log scale. For this
example, the graph will be printed using the 0 to 400 micro-ohm linear scale option.
Press the
[1]
key (0 – 400 u-Ohms).
k. The following screen will be displaying while the graph is being printed on the thermal
printer:
You will be returned to the “START-UP” menu when printing is finished. Sample
Dynamic Resistance Graphs are shown in Figure 31, Figure 32, and Figure 33.
PLEASE WAIT
PLOTTING GRAPH
DYNAMIC RES PLOT:
1. 0 – 400 u-Ohms
2. 0 – 2000 u-Ohms
3. 10 – 2000 SemiLog
1. PRINT TEST RESULTS
2. PLOT FULL CHART
3. PLOT EXPANSION
4. PLOT 0 - 200MS