Vanguard CT-8000 User Manual
Page 84
CT-8000 USER’S MANUAL
REV 2
79
3.6
Working with Test Records
3.6.1. Saving a Timing Record in Flash EEPROM
After performing a test, you can store the results in the CT-8000’s Flash EEPROM. To save a test
record:
a. Start from the “START-UP” menu:
Press the
[3]
key (SETUP).
b. The following screen will be displayed:
Press the
[3]
key (SAVE / RESTORE).
c. The following screen will be displayed:
Press the
[1]
key (SAVE SHOT).
d. The following screen will be displayed:
Press the
[ENTER]
key to save the test shot.
e. The following screen will be displayed:
Press any key to return to the “START-UP” menu.
SHOT SAVED
SAVE SHOT #1
TEST:STATIC RES TEST
DATE: 03/11/10 13:26
“ENTER” TO PROCEED
1. SAVE SHOT
2. RESTORE SHOT
3. SHOT DIRECTORY
4. ERASE SHOT
1. ANALYSIS POINTS
2. MEASUREMENT UNITS
3. SAVE / RESTORE
4. NEXT PAGE
1. RUN TEST 03/10/10
2. GET RSLT 09:04:05
3. SETUP
4. DIAGNOSTICS