Vanguard CT-8000 User Manual
Page 80
CT-8000 USER’S MANUAL
REV 2
75
d. The following screen will be displayed:
Press the
[1]
key (INTERNAL TRIGGER).
e. The following screen will be displayed:
Press the
[1]
key (OPEN).
f. The following screen will be displayed:
Hold down the
[ARM]
switch and press the
[START]
key.
g. The following screen will be displayed:
Continue to hold down the
[ARM]
switch until testing is finished. You will be returned
to the “START-UP” menu once testing is finished. Continue to step h to print the test
results.
h. The “START-UP” menu will be displayed as shown:
Press the
[2]
key (GET RSLT).
1. RUN TEST 03/10/10
2. GET RSLT 09:04:05
3. SETUP
4. DIAGNOSTICS
TEST IN PROGRESS
Hold “ARM” until
test completes.
(Up to 25 seconds)
Hold “ARM” until
test completes.
“START” to Begin
“STOP” to ABORT
TIMING MODE:
1. OPEN 2. CLOSE
3. O-C 4. C-O
5. O-C-O
TRIGGER MODE
1. INTERNAL TRIGGER
2. EXTERNAL TRIGGER