ZOLL E Series Monitor Defibrillator Rev R - Manual (Page 34)

E Series Operator’s Guide
2-10 9650-1210-01 Rev. R
• Manual mode started (AED only)
• Alarms triggered
• Code markers
• Recorder turned on
• NIBP measurements activated (if option is included)
In addition, the incident log lists the following:
• Report start time (time when Summary Report
memory was erased)
• Last event time (time of last event in memory)
• Total number of shocks
• Total pacer time
• System serial number
• Device identification number
Finally, a 12-lead log (if applicable) is appended to the
end of the incident log.
To print an incident log:
1. Press the SUMMARY button.
2. Press the Print Log softkey.
Adding a Patient Name and ID Number
to a Report
To add patient name and identification number to the
summary report:
1. Press the ID # softkey to access the Name and ID#
screen.
The cursor goes directly to Patient Name field. If you
don’t want to enter a name, press the ID # softkey to
move the cursor to the Patient ID field.
2. Use the scroll keys on top of the unit to select a
character on the keypad, then press the Commit ( )
key on top of the unit to enter the character in the
Patient Name field.
Repeat until you have entered the patient’s entire
name (up to 14 characters).
3. When you have entered the patient name, you can
do one of the following things:
• Select the Enter (  ) key from the keypad and
press the Commit ( ) key on top of the unit.
The highlight automatically advances to the
Patient ID# line.
• Press the ID # softkey to advance to the Patient ID
field.
• Press the Return Softkey to save the information,
if you do not want to enter a Patient ID number.
This returns you to the main menu.
Pressing the Cancel softkey returns you to the Patient
Information menu without storing the name and ID
number.
4. Repeat step 2 to enter up to 14 characters in the
Patient ID field.
5. When you have entered the ID#, you can do one of
the following things:
•
Select the Enter (  ) key from the keypad and
press the Commit ( ) key on top of the unit to
store the name and ID number and return to the
Patient Information menu.
• Press the Return Softkey to store the name and
ID number and return to the Patient Information
menu.
• Press the Name softkey to go back to the name
field to make any corrections to the name field.
Pressing the Cancel softkey returns you to the Patient
Information menu without storing the name and ID
number.
Return ID # Cancel
PT. NAME: J
PT. ID:
Space Bar
Return Name Cancel
J
w
JOHN SMITH
PT. NAME: JOHN SMITH
PT. ID:
Return Name Cancel
J
w
JOHN SMITH
PT. NAME: JOHN SMITH
PT. ID: