Yokogawa Button Operated MV2000 - Manual (Page 149)

5-27
IM MV1000-01E
Screen Operat
ons
1
2
3
4
5
6
7
8
9
10
11
12
13
App
Index
5.10 Vewng Operaton Hstory Logs
You can view the following kinds of logs.
Login log, error log, communication log, FTP log, Web log, e-mail log, SNTP log, DHCP
log, and Modbus status log
Procedure
• Openng the LOG dsplay
1. Press DISP/ENTER to open the display selection menu.
2. Select LOG with the up and down arrow keys.
* LOG is not displayed by default.
To display LOG on the menu, see section 6.17.
3. Press the right arrow key to open the submenu.
4. Select a submenu item with the up and down arrow keys.
To close the menu without changing the display, press ESC.
Submenu: LOGIN, ERROR, COMMUNICATION, FTP, MAIL, WEB, SNTP, DHCP,
MODBUS
5. Press DISP/ENTER.
The selected display appears.
Explanaton
• LOGIN Log
The log number of the last line and
the total number of logs
User name
Operation method (see the table below)
Operation (see the table below)
Date and time
Acton Descrpton
Login Login
Logout Logout
NewTime Time adjustment while memory is stopped
TimeChg Time adjustment through key operation
PowerOff Power OFF (power failure occurred)
PowerOn Power ON (recovered from a power failure)
TrevStart The start of the operation of gradually adjusting the time
TRevEnd The end of the operation of gradually adjusting the time
SNTPtimset Time adjustment by SNTP
Factor Descrpton
KEY Key operation
COM Operation using communication
REM Operation using remote control function
ACT Operation caused by event action
SYS System operation