Yokogawa DA100 - Manual (Page 100)

IM DA100-11E App-5
Computing Equation
App
App. 2 Report Function
The DA calculates and processes an hour’s, day’s or month’s worth of measurement or computation
data into instantaneous values, averages and/or sums. The results can be delivered using the
communication function.
Reports come in the following three types.
• Hourly report
Intervals Between Making Reports; Every hour (1:00, 2:00 . . ., 23:00, 24:00)
Data Item for Computing; An hour’s average, maximum and minimum
An hour’s sum and cumulative sum
Instantaneous value at the time of making the report
• Daily report
Intervals Between Making Reports; Every other day (preset time)
Data Item for Computing; A day’s average, maximum and minimum
A day’s sum and cumulative sum
Instantaneous value at the time of making the report
• Monthly report
Intervals Between Making Reports; Every other month (preset time)
Data Item for Computing; A month’s average, maximum and minimum
A month’s sum
Instantaneous value at the time of making the report
On/Off of Hourly, Daily and Monthly Report Making
Configure the on’s and off’s of hourly, daily and monthly report making, separately. You can set
hourly, daily and monthly report making all to “on” at the same time. In addition, you can set daily
and monthly reports to either the standard format (ON1) or the enhanced format (ON2) of output.
Note that the enhanced format can only be set for either daily reports or monthly reports.
Output Formats
The format of output is available in either the standard or enhanced format. Hourly reports can have
the standard format only.
Standard format: Prints the results of computing configured on a report-channel basis.
Enhanced format:
Daily reports: the results of computing configured on a report-channel basis plus
information on instantaneous values given at each preset time.
Monthly reports: the results of computing configured on a report-channel basis plus
information on instantaneous values given simultaneously with the
preset time for making each report
Time to Make Report
Set the time to make a report in the format day of month : time. Define the day of month field within
a 01-28 range and the time field within a 00-23 range.
Hourly reports:
The DA makes reports every hour on the hour (1:00, 2:00, . . ., 23:00, 24:00). For cumulative
summation, it resets the cumulative sum at a preset time.
Daily reports:
The DA makes reports at a preset time or times. For cumulative summation, it resets the
cumulative sum at the preset time of a day.
Monthly reports:
The DA makes reports at a preset time of the day.