Yokogawa PC-Based MX100 - Manual (Page 1080)

23-2
IM MX190-01E
Control Functions
Function Command Function
Switch operation mode DS DAQDA100. switchModeDA100
Retrieve code type - DAQDA100. switchCodeDA100
Switch (binary/ASCII code)
Reconfigure RS DAQDA100. reconstructDA100
Initialize settings RC DAQDA100. initSetValueDA100
Reset alarms AR DAQDA100. ackAlarmDA100
Set date/time (current) SD DAQDA100. setDateTimeNowDA100
Calculation start/stop EX DAQDA100. switchComputeDA100
Report start/stop DR DAQDA100. switchReportDA100
Establish setup mode XE DAQDA100. establishDA100
Generally, the status is updated at the end of the process.
Status is not updated when establishing the setup mode.
Setting (Operation Mode) Functions
Function Command Function
Range SKIP (not used) SR DAQDA100. setRangeDA100
DC voltage input SR DAQDA100. setRangeDA100
Thermocouple input SR DAQDA100. setRangeDA100
RTD input SR DAQDA100. setRangeDA100
Contact input (DI) SR DAQDA100. setRangeDA100
DC current SR DAQDA100. setRangeDA100
Strain SR DAQDA100. setRangeDA100
Pulse SR DAQDA100. setRangeDA100
Power monitor SR DAQDA100. setRangeDA100
Diff comp between ch SR DAQDA100. setChDELTADA100
Remote RJC SR DAQDA100. setChRRJCDA100
Unit name SN DAQDA100. setChUnitDA100
Alarm SA DAQDA100. setChAlarmDA100
Becomes the channel unit setting.
The status is updated after the setting is entered.
23.1 Functions and Their Functionalities - DARWIN/C# -