Yokogawa PC-Based MX100 - Manual (Page 1206)

25-8
IM MX190-01E
Talker Function Types
Mnemonic Description
DAQDA100_TALK_MEASUREDDATA Outputs measured and computed data
DAQDA100_TALK_OPEDATA Outputs the setup data of operation mode.
DAQDA100_TALK_CHINFODATA Outputs the channel information data
DAQDA100_TALK_SYSINFODATA Outputs the system configuration data
DAQDA100_TALK_CALIBDATA Outputs the calibration data (setup data of
calibration mode)
DAQDA100_TALK_SETUPDATA Outputs the setup data of setup mode
DAQDA100_TALK_REPORTDATA Outputs the report status
Status Byte Values
Can be synthesized using logical OR operators.
Mnemonic Description
DAQDA100_STATUS_OFF Value when all status bytes are invalid
DAQDA100_STATUS_ADCONV A/D conversion complete
DAQDA100_STATUS_SYNTAX Command syntax error
DAQDA100_STATUS_TIMER Internal timer start/report creation
DAQDA100_STATUS_MEDIA Access to medium (DC100)
DAQDA100_STATUS_RELEASE Measurement dropout during computation
DAQDA100_STATUS_ALL Mask value that enables all status bytes
DAQDA100_STATUS_SRQ SRQ
For details on the meaning of the status byte value, see the communication interface
user’s manual for the DARWIN instrument.
Establish Setup Mode
Mnemonic Description
DAQDA100_SETUP_ABORT Destroy
DAQDA100_SETUP_STORE Establish
Unit Numbers
Mnemonic Description
DAQDA100_UNITNO_MAINUNIT Main unit of the extension model
DAQDA100_UNITNO_STANDALONE Standalone model unit
The subunit number is numerical. See Channel/Relay types.
25.2 DARWIN Constants