Yokogawa PC-Based MX100 - Manual (Page 490)

9-2
IM MX190-01E
Control Functions
Function Command Function
Switch the setting mode. DS transModeDARWIN
System reconfiguration RS initSystemDARWIN
RAM clear (Initialize the operation mode setup RC
parameter.)
Alarm reset AR
Date/time setting SD setDateTimeDARWIN
SD setDateTimeNowDARWIN
Calculation start/stop EX computeDARWIN
Report start/stop DR reportingDARWIN
Finalize setup mode XE establishDARWIN
Setup Functions
Function Command Function
Range Settings SKIP (not used) SR setSKIPDARWIN
DC voltage input SR setVOLTDARWIN
Thermocouple input SR setTCDARWIN
RTD input SR setRTDDARWIN
Contact input (DI) SR setDIDARWIN
Difference computation between SR setDELTADARWIN
channels
Remote RJC SR setRRJCDARWIN
DC current SR setMADARWIN
Strain SR setSTRAINDARWIN
Pulse SR setPULSEDARWIN
Power monitor SR setPOWERDARWIN
Set the scale unit. SN setScallingUnitDARWIN
Set the alarm. SA setAlarmDARWIN
9.1 Functions and Their Functionalities - DARWIN/Visual Basic -