Yokogawa PC-Based MX100 - Manual (Page 439)

7-41
IM MX190-01E
DARWIN - Visual C++ -
7
CDAQDARWIN::talkOperationData
Syntax
int talkOperationData(int startChType, int startChNo, int
endChType, int endChNo);
Parameters
startChType Specify the start channel type.
startChNo Specify the start channel number.
endChType Specify the end channel type.
endChNo Specify the end channel number.
Description
Executes the declaration for retrieving setup data of the operation mode from the
start channel (start channel type and start channel number) to the end channel (end
channel type and end channel number). This function executes the TS and LF
commands of the DARWIN communication function. After executing this function,
use the getSetDataByLine function to retrieve the data line by line.
Return value
Returns an error number.
Reference
send startTalker
CDAQDARWINChInfo::toChName
CDAQDARWIN::talkSetupData
Syntax
int talkSetupData(int startChType, int startChNo, int
endChType, int endChNo);
Parameters
startChType Specify the start channel type.
startChNo Specify the start channel number.
endChType Specify the end channel type.
endChNo Specify the end channel number.
Description
Executes the declaration for retrieving setup data of the setup mode from the start
channel (start channel type and start channel number) to the end channel (end
channel type and end channel number). This function executes the TS and LF
commands of the DARWIN communication function. After executing this function,
use the getSetDataByLine function to retrieve the data line by line.
Return value
Returns an error number.
Reference
send startTalker
CDAQDARWINChInfo::toChName
7.4 Details of the DARWIN Class