Yokogawa PC-Based MX100 - Manual (Page 23)

1-8
IM MX190-01E
1.4 Installation
Procedure
1. Turn ON the PC and allow the operating system to start.
Note
Close memory resident programs such as virus protection programs before installation.
2. Insert the CD-ROM containing the software into the CD-ROM drive.
3. After a few moments, the DAQMASTER DARWIN MXAPI window and the Install
Shield Wizard window appear. Next, the following screen appears. Follow the
instructions on the screen.
If the DAQMASTER DARWIN MXAPI window does not appear, carry out the
procedure below.
Click My Computer and double-click the CD-ROM icon. Double-click the Disk 1
icon and double-click Setup.exe in the folder. The DAQMASTER DARWIN MXAPI
window and the Install Shield Wizard window appear. Then, the following screen
appears. Follow the instructions on the screen.
Note
• Reinstalling the Software
If you carry out step 3 on a PC that has the software already installed, a window for
confirming the file deletion opens. Click OK to delete the software. Then, carry out step
3 to reinstall the software.
• You can uninstall the API by double-clicking Add/Remove Programs in the Windows
Control Panel.