Yokogawa PC-Based MX100 - Manual (Page 1229)

App-8
IM MX190-01E
Measured Value
The measured values are expressed using a data value and a decimal point
position.
The value with an engineering unit is obtained by using the data value and the
decimal point position.
Data Value
A value that expresses the mantissa of the measured value as an integer value.
Decimal Point Position
A value that expresses the exponent of the measured value.
It is an integer value between 0 and 4.
Is -1 only for the strain range of 200000 µstrain.
Module Information
Information on each module excluding the main module.
Identified by the slot position on the unit.
It consists of the following items.
• Product information
• Module type (at startup, actual)
• Number of channels
• Interval type
• AD integration time type
• Terminal type
• Valid/Invalid value
• Module version
• FIFO number
Module Number
A number used to identify the module position (slot position).
It is an integer value between 0 and 5.
Numbers are defined.
Network Information Data
Network setup information.
See the MXNetInfo structure.
Appendix 1 MX100 Terminology