Yokogawa PC-Based MX100 - Manual (Page 110)

2-87
IM MX190-01E
MX100 -Visual C++
2
Range Settings
setSKIP Sets SKIP (not used).
setVOLT Sets DC voltage input.
setTC Sets thermocouple input.
setRTD Sets RTD input.
setDI Sets Digital input (DI).
setDELTA Sets difference computation between channels.
setSpan Sets the span.
setScalling Sets the scale.
changeRange Changes the range using the temperature unit type.
setRES Sets the resistance range.
setSTRAIN Sets the strain range.
setAO Sets the AO range.
setPWM Sets the PWM range.
setCOM Sets the communication range.
setPULSE Sets the pulse range.
Check
isCorrect Checks the validity.
Utilities
getItemError Gets number of the parameter on which error was detected.
getRangePoint Gets the decimal point position of the range type.
getRangeMin Gets minimum value of the setting range of the range type.
getRangeMax Gets maximum value of the setting range of the range type.
Operator
operator= Executes substitution.
• Overridden Members
Member Data Manipulation
initialize Initializes the data member.
Utilities
isObject Checks an object.
• Inherited Members
See CDAQChInfo.
getChNo getPoint setChNo setPoint
CDAQMXChIDReference
getAlarmType getAlarmValueOFF getAlarmValueON getChName
getChType getComment getKind getMXChID getRange getScale
getTag getUnit isValid setAlarmValue setComment setChType
setMXChID setTag setType setUnit setValid toChName toChNo
toUnitNo
2.5 Details of the MX100 Class