Lincoln Electric IM8001 PRODUCTION MONITORING 2.2 - Manual (Page 102)

Weld Listing Tab Chapter 5. Using Production Monitoring™
IM8001 Production Monitoring™ User Manual 5.29
Field Description
True Energy This column displays the True Energy™ calculated for the individual weld. If the
Welding Power Source that made the weld has older firmware, it does not
support the True Energy™ calculation, and Production Monitoring™ displays a 0
for the True Energy column.
Arc Time (s) The time displayed in the Arc Time column is the duration of the weld (or the
time it took to create the individual weld).
Wire Deposition Report
The Wire Deposition Report allows you to analyze how much material was used for each weld made by the
Welding Power Source or Group of power sources you have selected in the Asset Tree. Production
Monitoring™ displays this measurement in pounds or kilograms.
Figure 5.26 Weld Listing Report: Wire Deposition
The top half of the report is a graph that displays the amount of material used to make each individual weld
in the list below the graph.
The bottom half of the report is a tabular list of the data. On the right, the system also displays the criteria
used to generate the data. Table 5.18 explains the columns on this report in more detail.
Table 5.18 Columns on the Weld Listing Wire Deposition Report
Field Description
Start of Weld The Start of Weld column displays the date and specific time the Welding Power
Source began performing the weld.
If you want to see additional information about the individual weld, simply click
the underlined date and time. The system automatically generates a Weld Detail
report for that weld (page 5.30).