Lincoln Electric IM8001 PRODUCTION MONITORING 2.2 - Manual (Page 33)

Chapter 3. Installing Production Monitoring™ Installing Microsoft Internet Information Services (IIS)
3.10 Production Monitoring™ User Manual IM8001
Procedure Details
7. Place a check mark next to World
Wide Web Service and click the
Details button.
The World Wide Web Service window opens.
8. Place a check mark next to Server Side
Includes and click OK.
9. Click OK on any open windows until you
get back to the Windows Component
Wizard.
10. Click Finish. The system completes the installation.
Congratulations! You have activated IIS for your
server computer. If you haven’t enabled COM+ on
your server or you’re not sure, continue to page 3.16.
Otherwise, continue to page 3.18 to install or update
Power Wave® Manager.
Windows Vista IIS Installation
With Windows Vista, the installation files were saved to the computer when the Operating System was
installed on the computer. Since you want to turn the computer into an internal web server, you need to
run the IIS installation to enable the appropriate components.
Procedure Details
1. Log in to the server computer as the
administrator user.
Contact your IT department for appropriate user
name and password if necessary.
2. Select the Start > Control Panel from the
computer’s main program menu.