Lincoln Electric IM8001 PRODUCTION MONITORING 2.2 - Manual (Page 91)

Chapter 5. Using Production Monitoring™ Production Tab
5.18 Production Monitoring™ User Manual IM8001
Figure 5.17 Production Report: Wire Feed Speed
The top half of the report is a graph that shows you the average wire feed speed and the wire deposition
for the welds made during each Period in the list below the graph. The Period depends on the selections
made on the Criteria window. See page 5.11 for details on the fields of the Criteria window.
The bottom half of the report is a tabular list of the data. On the right, the system also displays the criteria
used to generate the data. Table 5.9 explains the columns on this report in more detail.
Table 5.9 Columns on the Wire Feed Speed Report
Column Description
Period The Period column reflects the choice made in the Group Welds drop-down on
the Criteria window, as well as the Start Date/End Date range and Shift
selected.
To generate a new, more detailed report for a specific Period in the report, click
the link. The system automatically generates the Wire Feed Speed report on the
Welding Listing tab for you (page 5.27).
Avg. WFS Every weld has an average wire feed speed value that was measured
throughout the duration of the weld. The system takes that averaged value for
each weld that was performed during the time period displayed in the Period
column, totals them and displays that average in the Avg. WFS column.
Wire Deposition This column displays the amount of wire (in pounds or kilograms) that was
deposited for the welds made during the time period displayed in the Period
column by the Welding Power Source you have selected in the Asset Tree.