Lincoln Electric IM8001 PRODUCTION MONITORING 2.2 - Manual (Page 46)

Installing Production Monitoring™ 2.2 Software Chapter 3. Installing Production Monitoring™
IM8001 Production Monitoring™ User Manual 3.23
Installing Production Monitoring™ 2.2 Software
Once you have removed any old versions of Production Monitoring™, installed IIS and any other necessary
components (depending on your operating system), you are now ready to install Production Monitoring™.
STOP | Be sure that you have completed all the preliminary
requirements on the preceding pages before you continue.
Your installation could fail if you have not met these
requirements.
NOTE | Installation time is approximately 45 minutes.
Procedure Details
1. Insert the installation CD into the disk drive
or locate the downloaded files.
You either received a CD, or the Lincoln Electric team
provided you online access to a ZIP file to download
and extract.
2. Double-click Setup.exe from the installation
CD or your downloaded files.
The Lincoln Production Monitoring welcome
window opens.
3. Select your language from the Language
drop-down and click Next.
The software’s License Agreement displays.
4. Place a check mark in the I accept the terms
of the License Agreement checkbox and
click Next.
The system prompts you for the installation path for
Production Monitoring™.
The default location is:
C:\Program Files\Lincoln Electric