Lincoln Electric IM8001 PRODUCTION MONITORING 2.2 - Manual (Page 95)

Chapter 5. Using Production Monitoring™ Weld Listing Tab
5.22 Production Monitoring™ User Manual IM8001
Figure 5.20 Welding List Criteria
Table 5.12 Criteria Fields Available on the Welding List Reports
Field Description
Production Date Select the date on which the weld(s) were performed for the data you want to
review. Welds completed on this date (that also meet all other criteria you select)
appear in the resulting report.
Remember that you may have welds included in the report from the day before the
date you selected. This occurs when the weld was performed during a shift that
crosses the midnight threshold and where your Production Monitoring™
administrator indicated that this data should be included in the next production
day’s reports. See page 4.11 for more information on Next Production Day.
TIP | You can type the date into the field, or you can click the calendar icon ( )
next to the field to display an interactive calendar where you can click on the date
you want. Use the arrow icons ( and ) to navigate to previous or future
months. The double arrow icons ( and ) move forward and backward by
three-month intervals.
Shift If you want to see weld data for welds made during a specific shift on the
production date you chose, select that shift from the Shift drop-down. Production
Monitoring™ narrows the data to include only welds performed during that shift on
that day. The Production Monitoring™ administrator configured the shifts on the
Administration page of the application.
Hour in Shift If you want to narrow the weld data to pinpoint those welds made during a specific
time in a shift, select a number from the Hour in Shift drop-down.
For example, if you select 3 from the Hour in Shift drop-down and Any from the Shift
drop-down, the report displays all welds made during the third hour of every shift
for the production date you selected.
Weld Profile You can generate the report for a specific Weld Profile used for the welds
performed during the date range selected. Remember, if the Weld Operator did
not select a Weld Profile for the weld, the Welding Power Source automatically
selected either Profile 32 (for machines that support only 32 Weld Profiles) or
Profile 200 (for those machines that support 200 profiles) to the weld.