Lincoln Electric IM8001 PRODUCTION MONITORING 2.2 User Manual
Page 42
Install the Latest Firmware
Chapter 3. Installing Production Monitoring™
IM8001
Production Monitoring™ User Manual
3.19
Procedure
Details
3.
In
the
Quick Links section, click the Power
Wave®, Power Feed®/MAXsa® Software link.
The system displays a page containing the
Download Power Wave® Bundle-FREE button.
4.
Click
the
Download Power Wave® Bundle-FREE
button to run the update.
NOTE |
Depending on your Windows version,
you may have to click Run or Allow to permit
your system to launch the file.
The system opens the Lincoln Electric System
Update Utility window where you tell the utility
how to find the Welding Power Source you want
to update.
5.
Choose
the
Connect through Ethernet option
and enter the IP address of the Welding Power
Source you want to update.
TIP |
If there is an IP address already
displayed, it is the IP address of the last
Welding Power Source that was connected.
Be sure you enter the correct address for the
current Welding Power Source you want to