Lincoln Electric IM8001 PRODUCTION MONITORING 2.2 - Manual (Page 90)

Production Tab Chapter 5. Using Production Monitoring™
IM8001 Production Monitoring™ User Manual 5.17
The top half of the report is a graph that shows you the average current and average voltage used for the
welds made during each Period in the list below the graph. The Period depends on the selections made on
the Criteria window. See page 5.11 for details on the fields of the Criteria window.
The bottom half of the report is a tabular list of the averages for each time period. On the right, the system
also displays the criteria used to generate the data. Table 5.8 explains the columns on this report in more
detail.
Table 5.8 Columns on the Current/Voltage Report
Column Description
Period The Period column reflects the choice made in the Group Welds drop-down on the
Criteria window, as well as the Start Date/End Date range and Shift selected.
To generate a new, more detailed report for a specific Period in the report, click the
link. The system automatically generates the Current/Voltage report on the Welding
Listing tab for you (page 5.26).
Avg. Current Every weld has an average current value that was measured throughout the duration
of the weld. The system takes that averaged value for each weld that was performed
during the time period displayed in the Period column, totals them and displays that
average in the Avg. Current column.
Avg. Voltage Every weld has an average voltage value that was measured throughout the duration
of the weld. The system takes that averaged value for each weld that was performed
during the time period displayed in the Period column, totals them and displays that
average in the Avg. Voltage column.
Wire Feed Speed (and Deposition) Report
The Wire Feed Speed report helps you review the performance of a Welding Power Source and provides
you with a look at the speed of the wire through the feeder, as well as the amount of material deposited
during the welds for this Welding Power Source.
NOTE | This report is only available for a single Welding Power
Source.