HT instruments SOLAR I-V - Manual (Page 11)

I-V400 - SOLAR I-V
EN - 9
5. MAIN MENU
Pressing the MENU/ESC key in any allowable condition of
the instrument displays the main menu screen, in which the
instrument may be set, the saved measures can be displayed
and the desired measuring function may be set (item EFF
only appears for instrument SOLAR I-V).
Select by cursor the desired options and confirm by pressing
ENTER 15/05/10 15:34:26
I - V I-V Test
E F F Y i e l d T e s t
S E T S e t t i n g s
DB Modules
MEM Data Recall
PC PC connection
E N T E R t o s e l e c t .
M E N U
5.1. SET – INSTRUMENT SETTINGS
Move the cursor to SET by means of the arrow keys (
,)
and confirm with ENTER. Subsequently, the displays shows
the screen which provides access to the various instrument’s
settings.
The settings will remain valid also after switching off the
instrument
15/05/10 15:34:26
G e n e r a l
M e a s . U n i t
D a t e a n d T i m e
R e m o t e U n i t / S o l a r i m .
I r r a d i a n c e
D C C l a m p
E N T E R t o s e l e c t .
S E T
5.1.1. General
1. Move the cursor to “General” by means of the arrow keys
(
,) and confirm with ENTER
2. The displays shows the screen which allows:
 Setting the instrument language
 Setting the enable/disable of auto power off
 Adjusting the contrast of display
 Enabling the acoustic signal when pressing a key.
3. By means of the arrow keys (
,) and select the desired
option by means of the arrow keys (
,)
4. Confirm with SAVE and the “Data saved” message is
displayed for a while. Press the ESC/MENU key to exit
without saving and to go back to the previous screen
15/05/10 15:34:26
L a n g u a g e :  E n g l i s h 
A u t o p o w e r o f f : N O
C o n t r a s t : 1 0
K e y B e e p : N O
S A V E t o s t o r e d a t a
S E T