HT instruments SOLAR I-V - Manual (Page 61)

I-V400 - SOLAR I-V
EN - 59
7.3. MANAGING THE RESULTS
7.3.1. Recall data of PV checks at display (solo SOLAR I-V)
1. Press ESC/MENU key to back to the main menu, select
the “MEM” item and confirm with ENTER to access inside
the section od saved data
2. Using arrows keys (
,) and the arrow key  select the
item “Recall”, the item “Yield Test” and confirm with
ENTER for the visualization of PV checks results only
3. Using arrow key
 the herewith labels can be displayed:
 TYPE  means the type of saved data: “REC” for a
complete PV check, “*REC” when the values of
irradiance/temperature measured by SOLAR-02 are not
available for the meter and “IST” for the saving of
instantaneous values at display
 DATA  means the date/hour od saved data on meter
 Comments  means the description gives by the user
during the data saved operation
4. Select the “IST” data, the item “View” and confirm with
ENTER. The herewith screen is displayed:
15/05/10 15:34:26
MEM TYPE
001 IST 08/04/2010
002 REC 13/05/2010
003 *REC 14/05/2010
Y i e l d T e s t
V i e I - V T e s t
R e c a l l
D e l e t e 
Select MEM - EFF
5. Press the arrow keys (
,) to access to the two available
screens
6. Press ESC/MENU to back to previous screen
7. Select the “REC” data, the item “View” and confirm with
ENTER. The herewith screen is displayed:
15/05/10 15:35:00

P d c 3 . 1 2 5 k W
V d c 3 8 9 V
I d c 8 . 0 1 A
n d c 0 . 8 8 ° C
P a c 3 . 0 1 2 k W
V a c 2 3 1 V
I a c 1 3 . 0 3 A
n a c 0 . 9 6
A n a l y s i s r e s u l t s
Select E F F
8. Press the arrow keys (
,) to access to the two available
screens
9. The final values of PV check relative to the maximum
efficiency condition detected are displayed
10. Press ESC/MENU to back to previous screen
11. Selecting the “*REC” data, the item “View” and confirm
with ENTER the message “Unable to execute analysis” is
displayed due to the missed of irradiance/temperature
values recorded by SOLAR-02. The partial values of
this measurement are only visible after downloading
the data onto PC (see § 8)
15/05/10 15:35:00

P d c 3 . 1 2 5 k W
V d c 3 8 9 V
I d c 8 . 0 1 A
n d c 0 . 8 8 ° C
P a c 3 . 0 1 2 k W
V a c 2 3 1 V
I a c 1 3 . 0 3 A
n a c 0 . 9 6
Select E F F