HT instruments SOLAR I-V - Manual (Page 34)

I-V400 - SOLAR I-V
EN - 32
32. To stop testing, press the GO/STOP key on instrument
SOLAR I-V and confirm pressing ENTER that you want to
stop recording.
33. The display of SOLAR I-V will show the message “DATA
DOWNLOAD” to indicate that the data will be transferred to
the main unit during its various phases.
34. After the automatic data transfer phase, the instrument:
 Do not show any results if do not exist on the PV
installation a “stable irradiance” condition more than the
minimum irradiance threshold.
 Display the best performance values if during the
recording, the Irradiance values reached the “stable”
condition and its values were higher than the minimum
irradiance threshold.
35. Press SAVE to save the results (see § 7.1) or ESC to exit
the screen of the results and go back to the initial screen.
15/05/10 15:35:00

P R p 0 . 8 1 5
I r r 9 7 1 W / m 2
P n o m 3 . 5 0 0 k W
T c 4 5 . 1 ° C
T e 3 0 . 5 ° C
P d c 3 . 1 2 5 k W
P a c 2 . 9 6 0 k W
n d c 0 . 8 0 6
n a c 0 . 9 4 7
A n a l y s i s R e s u l t
Select E F F