KROHNE IFC 110 Converter - Manual

Handbook
IFC 110 F V2.0
IFC 110 F-EEx V2.0
Signal converters for
electromagnetic flowmeters
Applicable to
Software Versions
● Display & control unit
No. 3.19937.02.00
● A/D converter
No. 8.13393.02.00
● Outputs/inputs (I/O)
No. 3.16230.01.00
How to use these Instructions
Flowmeters are delivered ready for operation.
The flow sensor must be installed in the pipeline as described in the instructions for
installation inside the packing of the flow sensor.
– Connection of power supply (Sect. 1.1-1.2) Pages 6- 7
– Electrical connection between IFC 110 F and primary head (Sect. 1.3) Pages 8-15
– Electrical connection of outputs and inputs (Sect. 2) Pages 16-24
– Factory settings (Sect. 2.7) and start-up (Sect. 3) Pages 25-27
Power the flowmeter. THAT’S ALL. The system is operative.
Operator control of the IFC 110 F signal converter is described in Sect. 4 and 5.
Variable area flowmeters
Vortex flowmeters
Flow controllers
Electromagnetic flowmeters
Ultrasonic flowmeters
Mass flowmeters
Level measuring instruments
Communications technology
Engineering systems & solutions
Switches, counters, displays and recorders
Heat metering
Pressure and temperature
DIN A4: 7.02145.33.00
© KROHNE 08/2003 US size: 7.02145.73.00