KROHNE IFC 110 Converter - Manual (Page 39)

Part B IFC 110 F Signal converter Sect. 4.6
05/2003 IFC 110 F 39
4.6 Resetting the totalizer and deleting error messages, RESET/QUIT menu
Delete error messages in RESET/QUIT menu
Key Display Description
- - - - - - - - - - - - / - - - Measuring mode
↵ CodE 2 - - Key-in entry code 2 for RESET/QUIT menu:
↑ →
↑ → ERROR QUIT. Menu for error acknowledgement
→ QUIT. NO Do not delete error messages,
press ↵ twice to return to measuring mode.
↑ QUIT. YES Delete error messages
↵ ERROR QUIT. Error messages deleted.
↵ - - - - - - - - - - - - / - - - Return to measuring mode
Reset totalizer in RESET/QUIT menu
Key Display Description
- - - - - - - - - - - - / - - - Measuring mode
CodE 2 - - Key-in entry code 2 for RESET/QUIT menu:
↑ →
↑ → ERROR QUIT. Menu for error acknowledgement
↑ TOTAL.RESET Menu for resetting totalizer
→ RESET NO Do not reset totalizer,
press ↵ twice to return to measuring mode
↑ RESET YES Reset totalizer
↵ TOTAL.RESET Totalizer is reset
↵ - - - - - - - - - - - - / - - - Return to measuring mode
4.7 Examples of signal converter settings
In the following example the cursor or flashing part of the display is shown in bold characters.
• Change measuring range of current output and value for error messages (Fct. 1.05):
• Change measuring range from 04-20 mA to 00-20 mA
• Change value for error messages from 0 mA to 22 mA
Key Display Description
→ If ”YES” is selected in Fct. 3.04 ENTRY
CODE, enter the 9-digit entry CODE 1: → → → ↑ ↑ ↑ ↵ ↵ ↵
Fct. 1.00 OPERATION
→ Fct. 1.01 FULL SCALE
4x ↑ Fct. 1.05 CURRENT I
→ FUNCT. I
→ ↵ RANGE I
→ 04-20 mA old current range
2x ↑ 00-20 mA new current range
↵ I ERROR
→ 0 mA old value for error messages
↑ 22 mA new value for error messages
↵ Fct. 1.05 CURRENT I
↵ Fct. 1.00 OPERATION
↵ STORE YES
↵ - - - - - - - - - - - - / - - - Measuring mode with new current output data