KROHNE IFC 110 Converter - Manual (Page 80)

Sect. 8.1 Part C Special applications, functional checks, service, and order numbers
80 IFC 110 F 05/2003
8 Service
8.1 Replacing the power supply fuse
Switch off the power supply before opening the housing.
1)
Remove the cover from the terminal compartment (remove 2 screws).
2) Unscrew the cap of the power supply fuse F.
3) Replace fuse F5 or F6, type 5 x 20 G (Order No. see Sect. 9).
F5: value for 100-230 V AC 0.8 A T, breaking capacity 1500 A
F6: value for 24 V AC / DC 1.6 A T, breaking capacity 150 A
F5/F6
power supply fuses, values are indicated above
FP plug-in terminal for field current supply line, 4-pin
I/O plug-in terminal for outputs and inputs, 2x8-pin
PE/FE U-clamp terminal for connecting protective conductor PE or functional grounding
conductor FE
PS plug-in terminal for power supply line, 3-pin
RS plug-in terminal for interface(s)
S U-clamp terminal for connecting the signal line shielding:
signal line A: 2nd shield (7)
signal line B: 3rd shield (11)
SC plug-in terminal for electrode signal line, 5-pin
S-EEx Same as “S”, only available for hazardous duty version
W internal connection, may not be removed.
RS
I/O