KYORITSU 1062 - Manual (Page 25)

83
Symbol and Unit Description
Appears when in DC-mode measurement
Appears when in AC-mode measurement
+ Appears when in DC+AC-mode measurement
– Appears when the polarity is negative
Appears when in diode test
Appears when in continuity check
Relative calculation indicator
R•H Fixed ranges indicator
AUTO AUTO range indicator
DATA HOLD indicator
AUTO HOLD indicator
PEAK HOLD indicator
Lit when in MIN/MAX/AVG-mode
Lit when in MIN/MAX/AVG-mode
Lit when in MIN/MAX/AVG-mode
Lit when in Memory function
AUTO OFF Auto power off indicator
RMS Appears in RMS mode
LP-Ω Appears in Low Power-Ω measurement
Filter Appears while filter is on
Shift Appears while the SHIFT key is held down
nF, μF, mF Unit for capacitance measurement
mV, V Unit for voltage measurement
μA, mA, A Unit for current measurement
MΩ, kΩ, Ω Unit for resistance measurement
°C / °F Unit for temperature measurement
kHz, Hz Unit for frequency measurement
dB, dBm Decibel calculation indicator
% (Main-display) Unit for percentage calculation
% (Sub- display) Unit for duty cycle ratio calculation
mV, V (Sub- display) Unit for voltage measurement (dB V , Hz V )
s (Sub- display) Unit for recording time when in MIN/MAX/AVG-mode
(Sub- display)
Recording time indicator when in MIN/MAX/AVG-mode
Number of saved data indicator
Reference value indicator when relative calculation
Duty cycle ratio indicator
Voltage value (dB V , Hz V ) indicator
Reference resistance value (dBm) indicator
OL Overrange Indicator
Appears when the batteries become low
Bar graph indicator, Range indicator