KYORITSU 1062 - Manual (Page 43)

101
4.5 AUTO POWER OFF Function
<To use the AUTO POWER OFF function>
The display shows the “ AUTO OFF ”indication.
• The instrument automatically turns off twenty minutes after the last key operation.
The instrument will beep for approximately 30 seconds to alert the operator before the
AUTO POWER OFF function takes effect.
• Pressing any key or switch while the instrument is beeping postpones the power-off time.
• Turning the function switch once after the power to the instrument is automatically turned
off switches the instrument on again.
<To cancel the AUTO POWER OFF function>
1) Turn the function switch to the OFF.
2) With pressing the HOLD key, turn the function switch to the desired position of any
measurement mode (function).
The “ AUTO OFF ” indication turns off when the function is canceled.
Note
Additional functions simply set when POWER ON can be used.
<To enable the AUTO POWER OFF function once again>
1) Turn the function switch to the OFF.
2) Turn the function switch to the desired position of any measurement mode (function).
The AUTO POWER OFF function is enabled again.
The display shows the “ AUTO OFF ” indication.