Martel Electronics DMC1410 - Manual (Page 12)

10
before it shuts off. [NEXT] proceeds to the clock menu, and [DONE]
returns to the home menu.
The Clock menu is the next menu displayed in the [MORE] menu
sequence. Its options are [CLOCK], [NEXT], and [DONE]. Choose
[CLOCK] to set the calibrator date and time as described in section 8
of this manual, [NEXT] to proceed to the terminal emulation menu,
and [DONE] to return to the home menu.
The Terminal menu is the last menu displayed after choosing
[MORE] in the main menu. Its options are [TERMINAL], [NEXT], and
[DONE]. Choose [TERMINAL] to enter terminal emulation mode.
Select [NEXT] or [DONE] to return to the home menu.
When the lower display is in the frequency or pulse mode, the
frequency level menu is added after the main menu. The options
available in this menu are [FREQ LEVEL], [NEXT], and [DONE]. The
[FREQ LEVEL] option is used to adjust the amplitude of the wave.
[NEXT] is used to access the contrast main menu, and [DONE]
returns to the home menu.
When the calibrator is in RTD CUSTOM mode, the RTD custom
setup menu, is inserted after the main menu. Options [SET
CUSTOM], [NEXT], and [DONE] are available. [SET CUSTOM] is
used to enter a custom PRT into the calibrator. Refer to Section 4.1-
8a for instructions. [NEXT] is used to enter the contrast main menu,
and [DONE] to return to the home menu.
The pressure zeroing main menu is the final variation to choosing
[MORE] in the main menu. It has the options [ZERO ], used to zero
pressure, [NEXT] and [DONE], which have the same function as
above. Refer to the Section 5.3 for instructions on zeroing.