Martel Electronics DMC1410 - Manual (Page 3)

1
1. Introduction
The Martel DMC1410 Multifunction Process Calibrator is a handheld,
battery-operated instrument that measures and sources electrical
and physical parameters. The calibrator has the following features
and functions:
• A dual display. The upper display is used for the measurement of
volts, current, and pressure. The lower display can be used to
measure volts, current, pressure, resistance temperature detectors
(RTDs), thermocouples, frequency, and resistance, and to source
pulse trains.
• A thermocouple (TC) input/output terminal with automatic
reference-junction temperature compensation
• Setpoints in each range for quickly increasing/decreasing output
• An interactive menu
• Complete serial interface for remote control
• Isolated read back for transmitter calibration
• Documenting capability for up to 50 tags
1.1 Customer Service
Corporate Office:
www.martelcorp.com
e-mail: [email protected]
Tel: (603) 434-1433 800-821-0023 Fax: (603) 434-1653
Martel Electronics
3 Corporate Park Drive
Derry, NH 03038
1.2 Standard Equipment
Check to see if your calibrator is complete. It should include:
DMC1410 Calibrator, Instruction Manual, Test Leads, Rubber Boot,
RS-232 cable, USB adapter cable, Nylon canvas carrying case, DVD/
CD Training, Quick Start Guide, NIST Certificate