Martel Electronics DMC1410 - Manual (Page 50)

PULSE_CNT?
Returns the number of pulses in the pulse train. Using the above
example, the returned value would be:
3000
REMOTE
Puts the calibrator in remote mode. From the remote mode the user
can still use the keypad to get back to local unless the command
LOCKOUT was entered before REMOTE. Than the keypad is totally
locked out, and the user has to send the LOCAL command to get
back to local operation.
RTD_TYPE
Sets the RTD type. The following is a list of RTD types they way they
should be entered after the command:
PT385_10;
PT385_50; PT385_100; PT385_200;
PT385_500; PT385_1000; PT392_100; PTJIS_100;
Ni120; Cu10; Cu50; Cu100; YSI_400;
OHMS; CUSTOM;
For example:
RTD_TYPE PT385_10 sets RTD type to Pt385-10
RTD_TYPE?
Returns the RTD type.
RTD_WIRE
Sets the number of wires used for connection in measuring RTDs.
The calibrator measures RTDs using 2-, 3-, and 4-wire connections.
After the command, enter 2W for 2- wire, 3W for 3-wire, and 4W for
4-wire. For example:
RTD_WIRE 4W sets the connection to 4-wire
RTD_WIRE?
Returns the number of wires used in the RTD connection.
SET_CLOCK yyyy mm dd hh nn ss
Sets the calibrator date and time, where yyyy is the four digit year
(2006 to 2100), mm is the two digit month (1 to 12), dd is the two
digit day (1 to the number of days in the specified month), hh is the
48