Martel Electronics DMC1410 - Manual (Page 97)

text string for it as documented in the user manual addendum
accompanying your calibrator.
The CJ field appears only for the Thermocouple type. It contains
a drop down list presenting all of the available options for a
standard calibrator. Select the cold junction option
corresponding to the instrument to be calibrated. If your
calibrator contains special software implementing a
non?standard cold junction option, enter the text string for it as
documented in the user manual addendum accompanying your
calibrator.
The Amplitude field appears only for the Frequency and Pulse
types. Enter the peak to peak amplitude to be generated.
The Fixed Type and Fixed Value fields appear only for the Pulse
type. Select counts or frequency as the fixed type and enter the
value to be used.
Tag Instrument Output Tab
The Type field contains a drop down list presenting all of the
available options for a standard calibrator. Select the type
corresponding to the instrument to be calibrated. If your
calibrator contains special software implementing a
non?standard type, enter the text string for it as documented in
the user manual addendum accompanying your calibrator.
The Units field contains a drop down list presenting all of the
standard units for the type selected above. Select the units
corresponding to the instrument to be calibrated. The Manual
type always requires user defined units which may be up to 5
characters in length. If your calibrator contains special software
implementing a non?standard unit, enter the text string for it as
documented in the user manual addendum accompanying your
calibrator.
The Curve field appears only for the Thermocouple and RTD
types. It contains a drop down list presenting all of the available
options for a standard calibrator. Select the curve corresponding
to the instrument to be calibrated. If your calibrator contains
special software implementing a non?standard curve, enter the
text string for it as documented in the user manual addendum
accompanying your calibrator.
The CJ field appears only for the Thermocouple type. It contains
a drop down list presenting all of the available options for a
standard calibrator. Select the cold junction option
corresponding to the instrument to be calibrated. If your
calibrator contains special software implementing a
non?standard cold junction option, enter the text string for it as
95