Martel Electronics DMC1410 - Manual (Page 92)

Selected Tag Reports
Upload selected tag calibration reports from the calibrator into
the Reports list box. Before using this function, upload a list of
the tag configurations contained in the calibrator using the Tag
ID's function above. In the Tag ID's list box, highlight the tags
which are to be uploaded, and then select this function to
upload them. The Reports list box is cleared before the upload.
Use the Configure menu to select the communications port.
Only reports for calibrated tags may be uploaded. Downloaded
tags which have not yet been calibrated are skipped after a
warning message is displayed.
Multiple individual tags are selected by holding down the Ctrl
key and clicking on them one at a time. Multiple contiguous
tags are selected either by clicking on the first and dragging to
the last, or by clicking on the first and holding down the Shift key
while clicking on the last.
When multiple tags are uploaded into the Reports list box they
are separated from each other by a line of dashes. If the tags
are saved into separate files, the dashes are removed.
The reports may be uploaded in text format suitable for direct
printing and use with word processors, or in CSV (comma
separated variables) format suitable for importing into
spreadsheets. The format is selected below.
Your company name can be inserted at the top of each
uploaded report. Use the Configure menu to enter a name to be
inserted into all calibration reports. Nothing is inserted if this
configuration item is left blank.
Upload in Text Format
Click on this item to upload calibration reports in text format. A
checkmark indicates that this format is selected for all further
uploads. The presently selected format is also displayed on the
status line at the bottom of the screen.
Upload in CSV Format
Click on this item to upload calibration reports in CSV
(spreadsheet) format. A checkmark indicates that this format is
selected for all further uploads. The presently selected format is
also displayed on the status line at the bottom of the screen.
Calibrator Identity
Display the identity of the connected calibrator.
90