Martel Electronics DMC1410 - Manual (Page 78)

The overall test status display provides the option of displaying
details for each test point.
The overall test status is displayed on the top line. If all points
passed, PASSED is displayed. If one or more points have failed,
FAILED is displayed.
Press the NO function key to bypass detail results display and
proceed to the test conclusion stage.
Press the YES function key to display the test details. The content
and operation of this display is identical to that described in the
section on viewing test results. When viewing is complete, press the
DONE function key to proceed to the test conclusion stage.
8.2.5 Test Conclusion
A prompt is displayed asking whether the As Found test results are
to be saved for the As Left test results, and the testing for this tag is
to be ended.
If the test has been successful and no further testing is required,
press the YES function key to return to the first level document mode
menu.
If further testing is required, press the NO function key and a prompt
is displayed asking whether an adjustment step is required before
proceeding to the first As Left test.
If an adjustment is required, press the YES function key, otherwise
press the NO function key to proceed directly to As Left data
collection.
8.3 Adjustment
During the adjustment process, the output values entered in the As
Found test can be generated by stepping up or down through the
test points. In addition, if the output type is one generated by the
calibrator (i.e. not pressure or manual) a user entered value, which
may be different from the test points, may be generated.
76