Techne PrimeQ User Manual
Page 117
Advertising
117
3.13.3.1 Viewing and changing the parameters
• Click the PAR button next to the baseline correction graph to bring up the parameter
settings for the analysis.
If any settings are changed, the data will be recalculated and the graphs and results table updated
accordingly.
The settings or analysis method can also be changed by accessing the Analysis Selection box
from the Results Editor main page.
If a PRD was assigned in the dye usage box, then the PRD correction options can be accessed by
clicking the PAR icon next to the raw data graph.
If the raw data graph is not shown, click the raw data graph icon.
Advertising