Techne PrimeQ - Manual (Page 160)

160
3.18.3.1 Viewing and changing the parameters
Click the PAR button next to the Multi-Read graph
to bring up the analysis settings. If any of the
settings are changed, the data will be recalculated
and the graphs and results table updated
accordingly.
The settings or analysis method can also be
changed by accessing the Analysis Selection box
from the Results Editor main page.
If a PRD was assigned in the dye usage box, then the PRD correction options can be accessed by
clicking on the PAR icon next to the raw data graph.
If the raw data graph is not shown click the raw data graph icon:
3.18.4 PrimeQ Report
The report options can be changed from within the report tab of the Results Editor. Click on the
Report Options icon, which will bring up the Report Options box. Tabs will display the report
options relevant for each stage. Change as appropriate and click Done to finish.