3 viewing the results – Techne PrimeQ User Manual
Page 141
141
• Choose the Peak Area option by checking the box.
3.15.2.6 Report Options and Summary
• Clicking Next leads through to the Report Options screen, which allows the user to decide
how the data appears in the PrimeQ report.
• Click Next to view a Summary of the setup.
• Click Back to change any settings or Cancel to abort the procedure.
• Click Finish to complete the set up.
3.15.3
Viewing the results
During the run, the real-time collection of data can be monitored on the Run screen. The plate
layout shows the fluorescence curve on a per-well basis and the temperature profile plot indicates
how far the run has progressed.
When the run has completed, results can be viewed in the Results Editor with data from each
stage of the run located under its own tab. Results of the ramp will be displayed under the tab in
which a ramp read was defined.