Techne PrimeQ - Manual (Page 23)

23
1.10 Before switching on
1.10.1 PrimeQ front view
1.10.2 Fuses
Ensure that the correct fuses are fitted for your voltage supply.
Fuses should only be changed by a competent person with training if necessary.
For voltages from 110 V to 130 V, use T10A fuses only.
1.10.3 Connections on the back of the unit
There are two cable connections: the mains power switch and the USB socket located on the rear
of the PrimeQ.
A. USB computer connection. Plug the USB lead into the
socket and connect the other end to your computer.
The lead must be less than 2 meters in length (the
lead supplied with the instrument is correct).
B. Power switch.
C. Fuses
D. Power connection. Ensure that the switch is in the off,
O, position. Plug the mains cable into the power
socket.
When PrimeQ is sited in the correct position and all the
connections have been made, turn the switch to the on (I)
position on the PrimeQ.