Techne PrimeQ - Manual (Page 172)

172
4.7 Packing the PrimeQ instrument
4.7.1 Remove the filter cartridges
Before packing the PrimeQ for transit it is essential to remove the filter cartridges.
• In the Cartridge Access and Editing screen of the Filter Wizard, click
Remove next to the appropriate filter.
Follow the procedure as shown and click Finish to
complete.
A message will appear informing the user to ‘Please
wait – checking cartridge status’.
If the removal was performed correctly, the Cartridge
Access and Editing table will be updated to display
Not Fitted next to the slot from which the cartridge
was removed.
Repeat for each filter cartridge until all have been
removed.
Wrap each filter in the tissue paper and place in the bag with the silica gel sachet. Replace in the
filter cartridge storage box.