Techne PrimeQ User Manual
Page 138
138
3.15.2.4 Manual peak detect
To use manual peak detect, select this option on the Dissociation Wizard Peak Detector screen.
• Number of peaks to find: Up to a maximum of four.
• Bin threshold: The user can specify a temperature range (°C) in which a peak will be
considered valid.
• Threshold filter: The user sets a threshold value to limit the size of the peaks detected (see
below). The default is 5%.
Once the data has been collected, the specific number of cursors will be present on the
dissociation peak graph in the Results Editor.
To select further peaks:
• Click on the PAR button next to the dissociation peak graph.
• Enter the number of peaks required in the Peak Detector window of the Dissociation curve
parameters.
• Click on each cursor using the mouse and drag each detection cursor to the desired position
on the graph.