Techne PrimeQ - Manual (Page 148)

148
3.16.3.1 Viewing and changing the parameters
Click the PAR button next to one of the graphs to
bring up the analysis settings for plus-minus
scoring. If any settings are changed, the data will
be recalculated and the graphs and results table
updated accordingly.
The settings or analysis method can also be
changed by accessing the
Analysis Selection box
from the Results Editor main page.
If a PRD was assigned in the dye usage box, then
the PRD correction options can be accessed by
clicking the PAR icon next to the raw data graph.
If the raw data graph is not shown click the raw data graph icon:
3.16.4 PrimeQ Report
The report options can be changed from within the report tab of the Results Editor. Click on the
Report Options icon, which will bring up the Report Options box. Tabs will display the report
options relevant for each stage. Change as appropriate and click
Done to finish.