Milestone XProtect Advanced VMS 2014 - Manual (Page 108)

Milestone XProtect ® Advanced
VMS 2014
Administrator's Manual
www.milestonesys.com 108 Management Client elements
Assign a default preset position
If required, you can assign one of a PTZ camera's preset positions as the camera's default preset
position.
It can be useful to have a default preset position because it allows you to define rules that specify that
the PTZ camera should go to the default preset position under particular circumstances, for example
after you have operated the PTZ camera manually.
1. To assign a preset position as the default, select the preset in your list of defined preset
positions.
2. Select the Default preset check box below the list.
You can only define one preset position as the default preset position.
Edit a preset position (type 1 only)
To edit an existing preset position defined in the system:
1. Select the preset position in the Presets tab's list of available preset positions for the camera.
2. Click Edit. This opens the Edit Preset window:
Example only. Features are camera-dependent
3. The Edit Preset window displays a live preview image from the preset position. Use the
navigation buttons and/or sliders to change the preset position as required.
4. Change the name/number and description of the preset position as required.
5. Click OK.